[[Gentoo Linuxな生活/システム管理関連]]
*運用監視 [#ya9d698c]
サーバといっても、インストールして、動き出しさえすればOK!というわけではありません。動作状態は定期的に監視して、問題の発見、対処、ソフトのインストールなどせねばなりません。作ることよりも、維持することのほうが大変なんです。男と女の関係と一緒ですな。
*Syslog [#d74e285e]
SyslogはUNIXにおける動作ログを収集するスタンダードです。動作のログ、エラーのログをとるものです。で、通常はこのログを監視していればいいのですが、''ログって結構量がおおいし、その中からだと、エラーの痕跡を見逃す場合もあるのですよ。
*Syslog監視ツール [#w1aae74a]
そんなわけで、Syslog監視ツールなるものがあります。
:Swatch|リアルタイムで何か事があったら通知してくれるツール
:logwatch|ログファイルをスキャンして、ログの要約を通知してくれるツール
と、あります。で、私が選んだのはlogwatchです。だってさぁ、四六時中サーバのそばにいるわけじゃあないからね。メールで動作状態が確認できれば一応十分なのですよ。
**logwatchインストール [#q6d2084d]
emerge -b logwatch
はい、インストール終了
**設定しましょう [#q426cacd]
/etc/log.dにlogwatch.confがあります。こいつを設定してやります。
#ログのある場所
LogDir = /var/log
#テンポラリエリア
TmpDir = /tmp
#メールを送る送付先
MailTo = XXXXX
#プリントアウトするかどうか
Print = No
#MkTempを使用するか
UseMkTemp = Yes
#いつのログを調査するか
Range = Yesterday
#ログ解析の詳細度
Detail = Low
どのサービスをチェックするか
Service = All
#メイルになんのツールを使用するか
mailer = /bin/mail
ほとんどデフォルトで問題ありません。さて、ここで問題なのは、このlogwatch、Syslogdを使った場合のRedHatなんかの設定がデフォルトになっていまして、Syslog-ngのSyslog出力とちょっとあっていません。なので調整してあげる必要があります。
**出力の調整 [#p796664d]
まず、構成から説明しますね
,/etc/log.d,logwatchの設定ルート
,/etc/log.d/conf,設定ファイルが入っている
,/etc/log.d/conf/logfiles,調べるlogファイル名の設定。
,/etc/log.d/conf/services,調べる動作サービスの設定
,/etc/log.d/scripts/,実際に調べるときに使うスクリプトファイル置き場
となってます。
-/etc/log.d/conf/logfilesにどのファイルを調べるかを書いておく。(messagesとか、maillogとか)
-/etc/log.d/conf/servicesに、何のサービスについて、どのファイルを調べるかを書いておく。
この2つでおっけーなはず。うちでは、amavis,apache,kernel,pam,postfix,samba,sshが該当してますね。
ちと例を出すと、/etc/log.d/conf/services/postfix.conf
#####################################################
# $Id: postfix.conf,v 1.3 2004/02/03 03:52:18 kirk Exp $
#####################################################
# You can put comments anywhere you want to. They are effective for the
# rest of the line.
# this is in the format of <name> = <value>. Whitespace at the beginning
# and end of the lines is removed. Whitespace before and after the = sign
# is removed. Everything is case *insensitive*.
# Yes = True = On = 1
# No = False = Off = 0
Title = postfix ←/etc/log.d/scripts/services/postfixを使って調べる
# Which logfile group...
LogFile = messages ←messagesを調べる。messagesの定義は
/etc/log.d/conf/logfiles/massages.confを見ると解る
# Only give lines pertaining to the postfix service...
*OnlyService = "postfix/[a-zA-Z0-9]*"
# *OnlyService = "postfix/smtpd"
*RemoveHeaders =
#####################################################
# This was written and is maintained by:
# Kenneth Porter <shiva@well.com>
#
# Please send all comments, suggestions, bug reports,
# etc, to shiva@well.com.
#
#####################################################
これはほとんど変更しておりません。で、次に/etc/log.d/conf/logfiles/messages.confを見てみると
#####################################################
# $Id: messages.conf,v 1.17 2002/10/13 15:24:27 kirk Exp $
#####################################################
#####################################################
# This was written and is maintained by:
# Kirk Bauer <kirk@kaybee.org>
#
# Please send all comments, suggestions, bug reports,
# etc, to kirk@kaybee.org.
#####################################################
# What actual file? Defaults to LogPath if not absolute path....
LogFile = messages ←ファイル名はmessages
# If the archives are searched, here is one or more line
# (optionally containing wildcards) that tell where they are...
# Note: if these are gzipped, you need to end with a .gz even if
# you use wildcards...
Archive = messages.* ←固めた過去ファイルはmessages.*
Archive = messages.*.gz
# Expand the repeats (actually just removes them now)
*ExpandRepeats ←アーカイブファイルもチェックする
# Now, lets remove the services we don't care about at all...
*RemoveService = talkd
*RemoveService = telnetd
*RemoveService = inetd
*RemoveService = nfsd
*RemoveService = /sbin/mingetty
# Keep only the lines in the proper date range...
*OnlyHost
*ApplyStdDate
こんな感じ。これもデフォルトそのままです。結構簡単にいけますでしょう。で、もう一つ問題。ここで、デフォルトパッケージについてくるlogチェックスクリプトには、postfix,apache,amavis等が付いておりません。ですので、[[logwatchホームページのCVS:http://www2.cvs.logwatch.org:81/index.cgi/logwatch/]]にアクセスしてみます。すると、追加サービスのスクリプトが落ちていますので、ダウンロードしてきて先ほどの情報を元に設定してやります。すると、追加サービスについてログをチェックしてくれるようになるわけです。さて、さっきのPostfixだと、
--------------------- postfix Begin ------------------------
5856267 bytes transferred
89 messages sent
Messages sent by:
XXXXXX (uid=XX): : X Time(s)
XXXXXX (uid=X): : X Time(s)
Relaying denied:
From unknown[211.49.139.241] to username@put_a_valid_domain.com : 1 Time(s)
さて、コレを見て解ること。誰かが不正中継を要求してきてますネ。211.49.139.241だれ?これって感じ。ほかにも、apacheがウィルスの攻撃をはじいたログも出てました。本日も安泰でした。
*最後に [#f05c1968]
logwatchを入れたから安心、というわけでは在りません。実際にlogを監視することも重要です。あくまでもログ監視作業を補完するツールであるという事をお忘れなく♪
- Syslog監視 のバックアップソース(No. All)
- 現: 2009-08-19 (水) 00:45:52 maruo